Skip to main content

Mon–Fri 8–5 · Sat 8–12 by appt.

Heating

Heat Pump Installation in Burlington County, NJ

Inverter and dual-fuel heat pump installation, sized by load calculation, with good, better, best options. Free installation estimates from Ken Gibson.

Serving Delran, Moorestown and surrounding Burlington County towns

A heat pump heats and cools your home with one system by moving heat rather than burning fuel. For many homes it is a comfortable, efficient option, and for others a dual-fuel pairing with a gas furnace is a better fit. At Gibson Home Services, owner Ken Gibson, an NJ Master HVACR contractor, handles installation estimates and helps you choose the right approach for your home. We have served Burlington County since 2009 and install Amana heat pumps, including inverter and dual-fuel systems.

What is an inverter heat pump?

An inverter heat pump uses a variable-speed compressor that adjusts its output to match what your home needs, instead of switching fully on and fully off. Homeowners usually notice the result as steadier temperatures and quieter operation.

Most people do not ask for inverter technology by name. They ask for a house that stays comfortable. Inverter equipment can help with:

  • More consistent temperatures: The system runs longer at lower output instead of cycling on and off.
  • Humidity control in summer: Longer, gentler run times help remove moisture.
  • Quieter operation: Much of the time, the system is running below full speed.
  • Potential efficiency benefits: Running at part load can use energy more efficiently, depending on the home and how the system is set up.

An inverter system is not required for every home. Ken will explain where it helps and where a traditional heat pump is a sensible choice.

How do heat pumps perform in cold weather?

Heat pumps can heat a New Jersey home through the winter, but as outdoor temperatures drop, a heat pump has less heat to draw from and works harder. That is why backup heat matters on the coldest days.

How well a heat pump performs in your home depends on the equipment, correct sizing, your ductwork and how well the house holds heat. Backup heat can come from electric auxiliary heat inside the air handler or, in a dual-fuel system, from a gas furnace. On your thermostat you may see "auxiliary heat" or "emergency heat"; these are normal operating modes, not a sign that something is wrong. Ken will walk you through how your system would handle cold snaps before you decide.

What is a dual-fuel system?

A dual-fuel system pairs an electric heat pump with a gas furnace. The heat pump handles heating in milder weather, and the furnace takes over when it gets colder, while the heat pump also provides your air conditioning in summer.

Dual fuel can make sense if you already have gas service and want the efficiency of a heat pump without relying on it during the coldest weather. It is not the right answer for every home. It depends on your home's configuration, existing utilities, electrical considerations and preferences. Learn more about dual-fuel systems, or see furnace replacement if your furnace is also near the end of its life.

Why does heat pump sizing matter?

A heat pump should be sized with a load calculation based on your home, not by square footage alone. Bigger is not automatically better, in heating or in cooling.

An oversized heat pump tends to short cycle, which can cause temperature swings, poor humidity control in summer, extra wear and unnecessary equipment cost. An undersized one may lean on backup heat more than it should. A proper load calculation considers construction, insulation, windows, layout and ductwork, and we also check that your ducts can deliver the airflow the new system needs.

What happens during a heat pump installation estimate?

Ken visits your home, reviews your current heating and cooling equipment, ductwork, thermostat and electrical setup, and asks how the house has been performing. A typical estimate takes about 30 to 60 minutes, and estimates for new and replacement installations are free.

You will typically receive a good, better, best proposal delivered electronically through Housecall Pro. Options may include a traditional heat pump, an inverter heat pump or a dual-fuel pairing with a gas furnace. Ken will explain the tradeoffs, what he would recommend and why, and you can take your time. There is no pressure.

Diagnostic and repair visits are priced separately from free installation estimates. If your existing heat pump needs service rather than replacement, see heat pump repair and service.

What about homes without ductwork?

For homes or rooms without ducts, a ductless mini-split can be a good fit. We install Daikin and Fujitsu ductless systems, which also use heat pump technology to heat and cool.

Ductless systems are often considered for additions, finished attics, garages converted to living space or homes where adding ductwork is not practical. Learn more about ductless systems.

Do you need a permit for a heat pump installation?

Yes, in most cases. Installing or replacing HVAC equipment generally requires a permit from your local jurisdiction, and requirements vary by town. Gibson Home Services pulls the required installation permits.

Permits are not optional just because someone would prefer to skip them. After installation, you handle the municipal inspection process with your town, and we will let you know what to expect.

What warranty and financing are available?

Every installation includes a 1-year Gibson labor warranty plus the manufacturer's parts warranty, which varies by equipment. Financing is available through Synchrony.

  • Extended labor coverage: An optional labor warranty of up to 10 years is available for an additional fee.
  • Warranty registration: We handle manufacturer warranty registration for you.
  • Financing: Multiple financing options are available through Synchrony Financial. See our financing page.
  • Ongoing care: Regular HVAC maintenance and our Comfort Club help keep your new system running well.

Why choose Gibson Home Services for heat pump installation?

You get owner-led guidance from a contractor who works with modern heat pumps, inverter systems, dual fuel and ductless equipment, and who will give you an honest recommendation.

  • Owner-led estimates: Ken Gibson, NJ Master HVACR contractor, NJ License 19HC00370300.
  • Established locally: Serving Moorestown and communities across Burlington County since 2009.
  • Credentials: EPA certified, bonded and insured.
  • Proper sizing: Load calculations, not rules of thumb.

Office hours are Monday through Friday, 8 AM to 5 PM, and Saturday 8 AM to 12 PM by appointment. Installation timing depends on equipment and scheduling, and your proposal will include a realistic timeline. See our service areas.

Curious whether a heat pump fits your home? Call (856) 220-4158 or request a free replacement estimate. Ken will handle your estimate personally.

Ready when you are

Need heat pump installation? Let's talk.

Mon–Fri: 8:00 AM – 5:00 PM · Sat: 8:00 AM – 12:00 PM (by appointment)

Call now Request service